English | 中文版
  • 主页
  • 关于我们
      > 公司简介   > 组织结构
  • 产品展示
      > 制冷剂气体   > 聚四氟乙烯   > 聚全氟乙丙烯   > 氟橡胶   > 聚偏氟乙烯   > 含氟精细化工品
  • 常见问题
  • 市场营销
  • 联系我们
  • 制冷剂气体
    • HCFC 制冷剂
      • 二氟一氯甲烷(R22)
      • 三氟二氯乙烷(R123)
      • 混合制冷剂R406a
    • HFC 制冷剂
      • 四氟乙烷(R134a)
      • 二氟甲烷(R32)
      • 五氟乙烷(R125)
      • 三氟乙烷(R143a)
      • 二氟乙烷(R152a)
      • 混合制冷剂R404a
      • 混合制冷剂R407c
      • 混合制冷剂R410a
      • 混合制冷剂R507
    • 发泡剂
      • 一氟二氯乙烷(R141b)
      • 一氯二氟乙烷(R142b)
    • 其它制冷剂
      • 异丁烷(R600a)
      • 八氟环丁烷(C-318)
      • 绿色制冷剂R508b
  • 灭火剂
    • 三氟甲烷(R23)
    • 七氟丙烷(HFC-227ea)
    • 全氟己酮
  • 聚四氟乙烯
    • 聚四氟乙烯悬浮
      • PTFE 悬浮粒料
      • PTFE 悬浮细粉
      • PTFE 中粒料
      • PTFE 造粒料
      • PTFE 预烧结料
    • 聚四氟乙烯分散
      • PTFE 分散概述
      • PTFE 分散4D, 4DL
      • PTFE 分散4D-F, 4DL-F
      • PTFE分散4DE
      • PTFE分散4DH
      • PTFE分散JBP-188
    • 聚四氟乙烯乳液
      • PTFE 乳液概述
      • PTFE乳液 4DC-A1,4DC-A2
      • PTFE乳液 4DC-D1, 4DC-D2
      • PTFE乳液 4DC-S
    • 聚四氟乙烯混料
      • 聚四氟乙烯混料 (15%玻璃纤维)
      • 聚四氟乙烯混料(15%碳纤维)
      • 聚四氟乙烯混料(40% 铜粉)
    • 聚四氟乙烯微粉
      • PTFE 悬浮超微粉
      • PTFE 分散超微粉
  • 聚全氟乙丙烯
    • FEP 模压料
    • FEP 挤出料
    • FEP 浓缩分散液
    • FEP 粉料
    • 聚全氟乙丙烯色母料
  • 乙烯四氟乙烯共聚物
    • 乙烯-四氟乙烯共聚物
  • 可熔性聚四氟乙烯PFA
    • 可熔性聚四氟乙烯PFA
  • 氟橡胶
    • 氟橡胶二元胶生胶
    • 氟橡胶三元胶生胶
    • 氟硅胶生胶
    • FSR-02 通用氟硅混炼胶
    • FSR-05 密封圈专用胶
    • 预混胶
      • 氟橡胶三元预混胶
      • 过氧硫化预混胶
      • 氟橡胶二元预混胶
  • 聚偏氟乙烯
    • DF-1 注塑级—粒子
    • DF-2 挤出级—粒子
    • DF-3 模压料-粒子
    • DF-4 涂料级—粉料
    • DF-5 锂电池级—粉料
  • 其它化工产品
    • 氯乙烯悬浮共聚树脂
    • 三氟氯乙烯(CTFE)
    • 全氟-2-甲基-2-戊烯
    • 全氟(4-甲基-2-戊烯)
    • 六氟丙烯三聚体
    • 双氟磺酰亚胺锂(LiFSI)
公司地址:
浙江省杭州市滨江区滨盛路1509号
电话:+86 571 86962376
传真:+86 571 86962776
邮箱:fluorotech@fluorotech.com.cn
产品展示
您所在的位置:主页 > 氟橡胶 > 氟橡胶三元胶生胶

氟橡胶三元胶生胶

Order Quantity:
 
氟橡胶三元胶生胶

FKM terpolymer is copolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene. Because of its high fluorine content, its vulcanized rubber has excellent oil resistance and high thermal stability, it also has good mechanical property, can be used in 2750C for long time. FKM terpolymer is widely used in aerospace, automotive, machinery, petrochemical, and other fields.

Items

B-315

B-330

B-350

B-370

B-395

Appearance

White or light-yellow flake

Density (g/cm3)  23 °C

1.86

1.86

1.86

1.86

1.86

Mooney viscosity
(ML(1+10)121°C)

5~ 20

21~40

41~60

61~80

81~110

Fluorine content (%)

69

69

69

69

69

Tensile strength
after press cure
(MPa) 177C,10min≥

9.0

9.0

9.0

10.0

10.0

Tensile   strength
after  post   cure
(Mpa) 230C,24H≥

10.0

10.0

10.0

11.0

12.0

Elongation at break
after press cure (Mpa)
177C,10min≥

200

200

200

180

180

Elongation at break
after post cure (Mpa)
230C,24H≥

180

180

180

160

160

4109 bisphenol oil
resistivity 180C,24H (%)

6

6

6

6

6

RP-3 oil resistivity
200C,24H≤

7

7

7

7

7

Water content (%)≤

0.15

0.15

0.15

0.15

0.15


Package,storage and transportation:

1.Fluorotech FKM Gum is packed in PE bags in the form of flake, and then packed into carton with net weight 20kg per carton.

2.Fluorotech FKM Gum should be stored in clean, dry and cool warehouse. It can be transported as non-hazardous chemicals and should be far away from pollution sources, sunshine as well as water during transportation.

3.It is suggested that Fluorotech FKM Gum storage time limit should be one year after production. If exceeding one year, these products should be retested, they could be used continuously after being retested up to grade.

相关产品 :
氟橡胶二元胶生胶
氟橡胶二元胶生胶
 
 
氟橡胶三元胶生胶
氟橡胶三元胶生胶
 
 
氟硅胶生胶
氟硅胶生胶
 
 
FSR-02 通用氟硅混炼胶
FSR-02 通用氟硅混炼胶
 
 
FSR-05 密封圈专用胶
FSR-05 密封圈专用胶
 
 
氟橡胶三元预混胶
氟橡胶三元预混胶
 
 

Copyright © 2014 fluorotech.com.cn 版权所有. 浙ICP备14035172号-1   浙公网安备 33010802004659号  
关键词:FEP Extrusion Grade | PTFE Fine Powder | Precompound FKM | Refrigerant Gas R134a      Sitemap